Welcome to Colorado Model Structures Components Page

Short Cut To:

Build-a-Building Components

Bridge Sides

Market Street Components

Wood Chip Car

Scratch Building Supplies

PLEASE NOTE - The components listed below are products that we offer for sale. Their listing on these pages does not indicate that all items are in stock. We will try to keep our Order Page up to date listing only items in stock as available to purchase, but suggest that if you want to make sure that all items you wish to order are in stock that you call or email us so that we may assure availability.

Note: Build-a-Building Components and Market Street Components are two entirely different component concepts. While both share many design features, there is no guarantee that products from one series are compatible with products from the other. Please read Design Consideration for Build-a-Building at the end of Build-a-Building section.

BRIDGE SIDES

CMS5710 - Through Girder Bridge - $7.95 ea side

CMS5710 - Through Girder Bridge - $7.95 ea side. 18-13/16 in long, 4-13/16 in high, 3/8 in thick including ribs. Shipping weight 10 oz.

CMS5711 - Deck Plate Girder Bridge - $6.95 ea side

CMS5711 - Deck Plate Girder Bridge - $6.95 ea side. 18-13/16 in long, 3-3/4 in high, 3/8 in thick including ribs. Shipping weight 9 oz.

CMS5712 - 1 each of CMS 5710 Through Girder Bridge Side & CMS5711 - Deck Plate Girder Bridge Side - $12.95 set Shipping weight 1 lb 3 oz

        

Photos show finished pieces painted with Krylon® Fusion for Plastic® Hammered Finish Paint.

BUILD-A-BUILDING COMPONENTS

CMS5500 - Stone Power House Window Section w/window- 10" wide by 11" high - $5.95 - Included pieces are wall section and window as shown in photo.

CMS5501 - Stone Engine House Door Section w/doors, 1 stone column joiner strip, & 1 stone corner joiner strip - $8.95- 10" wide by 11" high . Hinges and screws can be purchased at any craft shop such as Michaels or Hobby Lobby or on line at www.craft-inc.com and at www.fastener-express.com.

CMS5510 - Stone Portal - 10" wide by 11" high - $6.95 - Portal opening is 6-3/16" wide x 9" high at arch peak.

CMS5502 - Stone Blank Wall Section w/filler piece- 10" wide by 11" high - $6.25 - Included pieces are wall section, stone column joiner strip, & filler piece.

CMS5503 - Stone Single Window with Entry Door Section w/window, entry door, door lite- 10" wide by 11" high - $5.95 - Included pieces are wall section, entry door, door lite and window as shown in photo.

CMS5403 - Brick Single Window with Entry Door Section w/window, entry door, door lite- 10" wide by 11" high - $5.95 - Included pieces are wall section, entry door, door lite and window as shown in photo.

CMS5504 - Stone Overhead Door with Entry Door Section w/overhead door, entry door, & door lite- 10" wide by 11" high - $6.50 - Included pieces are wall section, entry door, door lite and overhead door as shown in photo.

CMS5404 - Brick Overhead Door with Entry Door Section w/overhead door, entry door, & door lite- 10" wide by 11" high - $6.50 - Included pieces are wall section, entry door, door lite and overhead door as shown in photo.

CMS5505 - Stone Double Window Section w/2 windows - w/window, door, door lite- 10" wide by 11" high - $5.95 - Included pieces are wall section, and 2 windows as shown in photo.

CMS5405 - Brick Double Window Section w/2 windows - w/window, door, door lite- 10" wide by 11" high - $5.95 - Included pieces are wall section, and 2 windows as shown in photo.

CMS5506 - 2 Expander Wall Sections - 10" wide by 11" high - $6.25 - Included pieces are 2 wall sections as shown in photo.

CMS5700 - Stone Column Joiner Strip - 2 side column strips - $1.89 - Will join 3 adjacent sides.

CMS5300 - Brick Column Joiner Strip - 2 side column strips - $1.89 - Will join 3 adjacent sides.

CMS5701 - Stone Corner Joiner Strip - 2 end column strips - $1.79 - Will join 1 corner.

CMS5301 - Brick Corner Joiner Strip - 2 end column strips - $1.79 - Will join 1 corner.

CMS5704 - Large 90 degree inside braces .42in x .42in x .592 in - Set of four pieces- $1.49

CMS5705 - Rear Support brace for straight wall joints - Set of four pieces- $1.99

BUILD-A-BUILDING Components have been used to build the Buildings shown below. See additional information under Design Considerations below

                 

Fremont Pass Engine House in Stone Detail - 20" wide by 30" deep

Design Considerations - Wall sections used for side walls are 10" wide. Designs wider than 20" will require our expander wall. Designs may be as deep as desired. Be sure to plan to either recess any track below the bottom of the Engine House door or plan on cutting off the door bottom to accomodate the rail height. The structural integrity of any design is dependent on the base upon with the structure is built. Please plan a solid, non flexible base as part of your design as well as secure attach points from the structure to the base. Additional inside bracing will probably be required for outside use. Roofs for all buildings can be cut from marine plywood for solid construction. A good outdoor enamel in several coats should be applied to any exposed part of the structure. Additional considerations may be needed to suit individual tastes and requirements
More information on BUILD-A-BUILDING(Click on back arrow in address bar to return to this page)

SCRATCH BUILDING SUPPLIES

CMS3130 - 1/32" Door Inset with door - $1.49/each set. Fits door opening on Kits Numbered 3001,3002,3003,3004,all 3005, 3006,3007,3008,3010,3011,3013,3014,3015,3017, & 3020 front

"G" 1/24 Scale SHINGLE ROOF SCRATCH BUILDING PLAQUE- CMS3100 - $5.95/ea

Our shingle roof pattern plaque is now available for $5.95. Each piece is 17-5/8 inches by 5-3/8 inches by approximately 1/8 inch thick. The molded-in detail as shown above and is identical to the shingle roof pattern in our building kits. Shipping weight is 9 ozs/ea.

"G" 1/24 Ribbed Steel Siding Plaque - $5.95

Panel is 17-3/4" wide by 5" high

"G" 1/24 Scale Brick Pattern Plaque - Available Now - $5.95

"G" 1/24 Scale DOOR & WINDOW SET - CMS3101 - $5.95/ea

"G" 1/24 Scale Window & Door Set - Available Now - $5.95

Our 11 Piece Door and Window Set is now available for $5.95/ea plus shipping (shipping charges calculated at checkout-may be combined with other items). Number of Pieces included and opening sizes(approximate) required are as follows: 2 doors - 3.5in x 1.525in , 4 double windows - 2in x 2.5 in, 2 single windows - 1in x 2.5in, 1 each of the following; .868in x 2.525in,.875in x 2.45in,& .625in x 2.2in. They are molded from high impact polystyrene (styrene).Shipping weight is 5 ozs/ea.

MARKET STREET COMPONENTS

All side walls are approximately 7-1/2 in wide & 10-7/8 in tall except CMS3022msi003, CMS3022msi004, CMS3022msi005 & CMS3022msi006 which are partial walls and measure 7-1/2 in wide & 5-1/2 in tall. Roof piece is 7-1/4 in x 7-1/4 in. All pieces are unpainted.

Market Street 2 piece corner with door and door surround CMS3022yz Shipping weight 12 ounces- $7.95

Market Street Front "a" with door CMS3022a - $3.95

Market Street Front "b" with steps & door CMS3022b - $4.50

Market Street Front "c" with steps & door CMS3022c - $4.50

Market Street Wall k - CMS3022k - $4.50

Market Street Wall d - CMS3022d - $4.50

Market Street Wall e - CMS3022e - $3.95

Market Street Wall f - CMS3022f - $3.95

Market Street Wall half height g - CMS3022g - $2.95

Market Street Wall half height h - CMS3022h - $2.95

Market Street Rear with door CMS3022rear - $3.95

Market Street Side CMS3022side- $3.75

Market Street Expander Wall CMS3022exp - $3.75

Market Street Roof CMS3022roof - $3.75

Market Street Warehouse Wall U with overhead and entry door & Wall V with overhead door, entry door, and dock plasform CMS3022uv- 9.50

Market Street Wall W with entry door & Wall X with two entry doors CMS3022wx - $8.50

Market Street Wall X with two entry doors CMS3022x - $3.24

CMS3022msi - Market Street Industrial. CMS3022msi001 & CMS3022msi002 measure 7-1/2 in wide & 10-7/8 in tall and are compatible with all Market Street Panesl except as follows. CMS3022msi003, CMS3022msi004, CMS3022msi005 & CMS3022msi006 are partial walls and measure 7-1/2 in wide & 5-1/2 in tall. Two partial panels can replace 1 full size panel by cutting off 1/8 in(1 course of bricks) from the top of ONE of the partial panels

Market Street Industrial Solid Brick Wall - CMS3022msi001 - $3.95

Market Street Industrial Brick Wall w/ 4 large windows - CMS3022msi002 - $3.75

Market Street Industrial Solid Brick Partial(See note above) Wall - CMS3022msi003 - $2.95

Market Street Industrial Brick Partial(See note above) Wall w/ 2 large windows - CMS3022msi006 - $3.15

Market Street Industrial Brick Partial(See note above) Wall w/ 1 large window & 1 entry door - CMS3022msi004 - $3.25

Market Street Industrial Brick Partial(See note above) Wall w/ 1 large window & 1 overhead door - CMS3022msi005 - $3.45

CMS3022ts - Train Shed Panel w/doors - $5.95 ea.

WOOD CHIP CAR

Now Available - CMS Wood Chip Car Kit with trucks and couplers - $29.95

CMS 7000tc - CMS Wood Chip Car Kit - $29.95/ea plus shipping(shipping charges calculated at checkout-may be combined with other items)1900's era Wood Chip Car. Includes plastic wheel trucks and loop couplers. Car dimensions exclusive of trucks & couplers are 12" long, 4" wide, by 4-5/8 high. Shipping weight 2 lb 5 oz.

Assembled & painted car

Exterior view of kit components. Top - Car Side ----- Bottom(left to right)car end, coupler strip, lower car end bolster, bay bottom piece, bay angle piece, & bottom piece w/truck mount. -

Interior view of kit components

Now Available - CMS Wood Chip Car Kit without trucks and couplers - $14.95

ORDER PAGE (CLICK HERE TO PLACE YOUR ORDER ONLINE)